Oce 3121, Техническое и сервисное руководство

Страница: 334 / 908

332 TSM Océ 3121 Adjustments
Display PBA
LED on the Display PBA
Functions of the DIP Switch DSW1 on the RDF control PBA.
LED Description
LED101 Indicates that an original has been set.
LED102 Indicates that an original has been set.
Purpose DSW1 settings Description
To select normal opera-
tion With all bits at OFF, normal operation
mode is assumed.
To execute pick-up and
delivery Each press on the switch (SW3)
causes the pick-up and the delivery
operations to repeat.
To adjust the sheet gap:
for image composition
mode After a press on the switch (SW3),
two documents and fed in and, then,
placed side by side on the platen.
Then, the switches and SW2 are used
to adjust the gap between the sheets.
Switch (SW3) is then pressed, to store
the adjustment value. Setting bit 6 to
ON, in FAX mode, puts a stamp mark
during delivery.
To execute the pick-up, to
reversal, to delivery oper-
ation Each press on the switch (SW3)
repeats the pick-up, then the reversal
and, finally, the delivery operations.
2 1
(copier mode)
(copier mode)
(fax mode)
(copier mode)