Oce 3121, Техническое и сервисное руководство

Страница: 121 / 908

C
o
nf
id
en
ti
a
l ©
20
00
O
c
é
-T
ec
hn
ol
o
g
ie
s
B
.V
.
ed.2 Trouble shooting 13
Types
The microprocessor identifies jams as follows:
■
Delay
The paper did not reach the appropriate sensor within the specified time: i.e.
the sensor is not ON.
■
Stationary
The paper did not leave the appropriate sensor within the specified time: i.e.
the sensor does not switch OFF.
■
Persistent
The paper remains over a sensor, with power ON. i.e. the sensor detects pa-
per.
Note:
A jam will be signalled in any of the following occur, during copying:
- the front door is opened,
- the right door is opened,
- the output door is opened,
- or the cassette is withdrawn.
Record of jams
The machine retains a history of the jams which have occurred. The history can
be checked in service mode.
In memory are:
■
The remaining number of copies, and
■
the relevant copying mode.
This memory will be used for job recovery, after the jam has been removed.
Note:
If the message “Return Original and Press Start” appears on the control
panel after removing the jam, put the original back into the feeder as they were
set initially.