Occhio Sento, Инструкция по монтажу

Страница: 38 / 48

36
Replacing the reflector head
To permit removal, it may be necessary to
loosen the fixing screw slightly.
Release the reflector head by simultane-
ously pressing on the lower part of the
carbon rod and gently turning/rocking the
reflector head.
Remove the reflector head carefully, pay-
ing attention to the bulb on the inside.
Do not snatch or pull too hard.
Caution:
Switch off the lamp before replacing
the reflector head and allow it to cool
down for at least
one hour.
$