Occhio Sento, Инструкция по монтажу

Страница: 34 / 48

32
Insert the reflector …
Fitting/replacing the Sento spot
Caution:
Switch off the lamp before replacing
the reflector head and allow it to cool
down for one hour.
$
Press out the release pin as far as it will
go.
Before working on the reflector head, al-
ways remove it from the lamp (see p. 36).
… and during assembly, check that
the cut-out for the bulb is positioned
correctly.
Insert the edge of the reflector into
the two springs and press against the
springs.