Occhio Sento, Инструкция по монтажу

Страница: 35 / 48

33
Fitting/replacing the Sento spot
Insert the glass/filter in the same way.
Insert the soft-edge glass so that the
satinised surface is on the inside.
Insert the anti-glare ring with side slits
into the springs, then into the notch on
the release pin.
Holding it in this position, clip the edge of
the reflector into the notch on the release
pin.
Press out the release pin in the opposite
direction.
Insert the cover/filter in the same way.
Press the release pin in until it is flush.