Obvius AcquiSuite+ A8814, Инструкция по установке и эксплуатации

Страница: 21 / 34

A8814 Acq Page 21
The graph will draw a blue box for each ModHopper that is attached to the system. The blue number inside the
box icon is the Modbus address of the ModHopper. To the side of each icon, three lines of information will be
shown.

The device list name will be shown to the side of each ModHopper icon

The link quality, hops and round trip time (rtt) will be printed under the ModHopper name.

A list of attached Modbus device addresses will be shown on the third line. This is a list of addresses that
the ModHopper has automatically detected on the local RS485 port.
The graph will print strong links in thick green lines. Lines progress from green, to yellow, to red to indicate weak
links.
Networking
Network Status
This page displays the current status of the AcquiSuite network connections. Several interfaces may be shown if
both Ethernet and ppp dialin/dialout are active at the same time. Each interface will report the ip address,
number of packets sent and received, and other details specific to the interface. For the ethernet interface, the
MAC address (HWaddr) will be shown as well as a network collision count.
Ethernet network
eth0 Link encap:Ethernet HWaddr 00:99:99:0E:C1:CA
inet addr:192.168.10.50 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2624171 errors:6 dropped:0 overruns:0 frame:0
TX packets:220342 errors:0 dropped:0 overruns:0 carrier:0
collisions:1 txqueuelen:100
RX bytes:174674347 (166.5 Mb) TX bytes:50607122 (48.2 Mb)
Interrupt:5 Base address:0x320