116
7. In the I
P Camera
screen, click the
Protocol
button to open the
Protocol Management
menu.
NOTE
Before customizing the protocol for the network camera, contact the manufacturer for specific information regarding main stream
and sub-stream setup requirements.
Example
: The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. E.g., rtsp://192.168.1.55:554/ch1/
main/av_stream.
•
Protocol Name
: Edit the name for the custom protocol.
•
Enable Substream
: If the network camera does not support sub-stream or the sub-stream is not needed, leave the
checkbox empty.
•
Type
: The network camera adopting custom protocol must support getting stream through standard RTSP.
•
Transfer Protocol
: Select the transfer protocol for the custom protocol.
•
Port
: Set the port No. for the custom protocol.
•
Path
: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
8. Click
Apply
to save the settings, and then click
OK
to close the menu. After adding the customized protocols, you can select
the protocol name listed in the drop down list. See the screen below.
APPENDIX C: ADDING CAMERAS ON THE LAN TO THE NVR
Содержание NVR4020
Страница 8: ...viii NOTES...
