5 | EN
Mounting instructions, PYROLINE
®
BSK fire protection duct
About these instructions
1 About these instructions
1 1
Target group
These instructions are intended for specialists and/or instructed technical
personnel (e.g. engineers, architects, heads of construction, and mount-
ing and installation engineers) who have had fire protection training and
are charged with the installation of the fire protection duct.
1 2
Relevance of these instructions
– These instructions are based on the standards valid at the time of
compilation (October 2021).
–
Follow these instructions to ensure correct and safe use.
– Any images are intended merely as examples. Mounting results may
look different.
– We will not accept any warranty claims for damage caused through
non-observance of these instructions.
– In these instructions, cables and lines are referred to simply as ca-
bles.
– These instructions describe standard solutions for mounting the PY-
ROLINE
®
Con BSK fire protection duct. Special solutions for specific
structural conditions are possible, but must be planned on-site with
the authorities.
– To find out more about planning and mounting the product, we recom-
mend a comprehensive training course.
1 3
Types of warning information
Type of risk!
Shows a risky situation. If the warning information is not observed, then
serious or fatal injuries may occur.
Type of risk!
Shows a risky situation. If the warning information is not observed, then
medium or minor injuries may occur.
Type of risk!
Shows a hazardous situation. If the safety instruction is not observed,
then damage to the product or the surroundings may occur.
Note!
Indicates important information or assistance.
1 4
Intended use
The PYROLINE
®
Con BSK fire protection duct is used for the installa-
tion and guidance of cables up to a maximum diameter of d = 52 mm in
escape and rescue routes in interior areas of buildings. It protects emer-
WARNUNG
VORSICHT
ACHTUNG
