
1 02
9 0
LF0 2
88 L
1
SMP
-
Since we did not select
SAM PL
as a waveform
(we're using
TRI),
this Parameter is ignored in this patch.
STEP
1 1 :
LF02 should be set up like this:
Speed Sp/Kbd Wave
40
0
TRI
Retrig
0
Amp
0
Ap/R2
+63
Trig
Lag
STRIG OFF
Smpl
KYB D
90 LF02 SPD
-
An excellent way to increase the "animation" of a
string sound is to use two different LFO speeds that are going to
two different destinations. LF02 is modulating the Pulse Width of
DC02 which itself produces its own type of vibrato. Use a VALUE
of 40.
91 LF2S I PRS
- As with LF01 , we'd like to keep the speed of
LF02 constant. Keep the default VALU E at
o.
92 LF02 (Wave)
-
Same as with LF01 . We'll keep the default
TRI
waveform.
93 LF2 RETRG
-
LF02 will not need to be retriggered since
RAMP2 will fade it in. The default VALUE of
O
should be kept.
94 LFO 2 AMP
-
Default VALU E =
0.
Use this setting as RAMP2
will be set in the next Parameter to bring
it
in gradually as a
modulation.
95 LF2A I RP2
-
We'll want RAMP2 to fade in LF02 to its
maximum output. And as with LF01 , the amplitude LF02 has
already been fine adjusted at its destination " 1 4 PW MOD BY
LFO 2". VALUE =
+63.
96 LF02 (Trig mode)
-
Since the LFO fades in by the control
of RAMP2, special triggering is not necessary. The start point of
the LFO's cycle is barely heard, if at all, by the fade-in. Keep the
default VALU E of STRIG.
97 LF02 LAG
- Same as with LF01 . LAG is not required so
leave it
OFF.
98 L2 SMP
-
Same as with LF01 . Since we selected
TRI
as our
waveform, this Parameter is ignored.
M atrix-GR Owner's Manual