MI SERIES
– Manual (v1.7)
Obelux Oy, Kutomotie 6 B, 00380 Helsinki FINLAND
© Obelux Oy 2017 Technical information in this document is subject to change without notice.
Page: 11(28)
Figure 7: Light head terminals
5.2.1
Mains input (ACW versions and L864-MX-GA)
Mark
Description
Information
L
Live terminal
Connect the mains power supply in into these screw connectors.
Colours are typically brown (for Live) and blue (for Neutral)
N
Neutral terminal
PE
Protective earth
Connect protective earth into this screw connector. PE line is typically
indicated with yellow/green shield on the wire.
Single-phase supply with Protective Earth. Tighten the connector screws using flat-head (straight)
screwdriver.
Conductor cross-section
0.2mm² - 2.5mm²
5.2.2
Mains output (ACW versions)
Mark
Description
Information
L
Live terminal
Connect the mains power supply in into these screw connectors.
Colours are typically brown (for Live) and blue (for Neutral)
N
Neutral terminal
PE
Protective earth
Connect protective earth into this screw connector. PE line is typically
indicated with yellow/green shield on the wire.
This terminal is used to distribute power from the light head to the next. Tighten the connector screws using
flat-head (straight) screwdriver.
Conductor cross-section
0.2mm² - 2.5mm²
