P1PVKY / P1PVCDKY
Installation & Service Instructions
030099-347
pg 12 of 14
© Copyright 2007 OASIS Corporation
Accessing the Internal Chassis
In order to carry out repairs to the refrigeration system, you may need to remove the side panel(s) from
the cabinet. Please follow the instructions given below to carry out this operation:
Safety Instructions:
•
Isolate the water cooler from the mains water supply – this may be done by closing any shut-off
valve fitted to the installation or temporarily disconnecting the cooler from the mains
•
Disconnect the cooler from the power supply
Remove Top from the Cooler:
•
Remove the two screws at the rear of the top, and lift off the lid assembly
Remove Side Panel
•
Remove the three screws as shown
•
Raise the panel vertically by about 25mm so that it clears the moulded base and the key slot,
then lift the panel away from the cooler
