Please read this manual carefully before installation or operation of the nozzle.
Be sure all instructions are understood. Correct installation, use and maintenance are essential. In
case of doubt or question, please contact your service contractor or the manufacturer.
DESCRIPTION
The N-CNG nozzle is designed for CNG refuelling of vehicles equipped with receptacles to NGV1 or
ISO 14469.
The nozzle either comes with a Service Pressure rating B200 / P30 = 207 bar / 3000 psi ( EU Standard )
or B250 / P36 = 250 bar / 3600 psi ( US Standard ).
The pressure rating is marked on the nozzle connector and can also be identified by the pressure color
code ring: blue = B200 / P30 ( EU Standard ) and yellow = B250 / P36 ( US Standard ). The N-CNG is a
so-called 'Type 1' nozzle and is used by pulling the lever. It also integrates an automatic venting and
swivel function, suitable for public and private CNG refuelling stations. The nozzle is designed to only
allow gas to flow when it is correctly coupled and to not allow uncoupling from the vehicle refuelling
receptacle when the nozzle is pressurised.
APPROVALS / OPERATING CONDITIONS
The N-CNG nozzle is designed and tested to CSA/ANSI NGV 1-2017 and ISO 14469:2017 for the use
of CNG refuelling of Natural Gas Vehicles with B200 / P30 and B250 / P36 receptacles.
Each nozzle is factory tested and labeled with the prescribed marking.
Media compatibility
CNG, Natural Gas, Methane, Biogas
Cv
1.1
Service pressure
B200 / P30 ( 207 bar / 3000 psi ) or
B250 / P36 ( 250 bar / 3600 psi )
Working pressure ( max. )
312,5 bar
Test Pressure
375 bar
Weight
1,6 kg
Media temperature range
-40° C ( -40° F ) to 65° C ( 149° F )
Ambient temperature
-40° C ( -40° F )
to
85° C ( 185° F )
Connection to hose
Swivel connection to fill line ( FL ):
9/16"-18 JIC 37° //
9/16"-18 SAE ( with / without adapter)
Swivel connection to vent line ( VL ):
7/16"-20 JIC 37° //
7/16"-20 SAE ( with / without adapter)
Dimensions ( max. )
Width: 63 mm
Length: 356 mm
Height: 133 mm
2
DRAFT
