CX Chlorinator - Salt and Mineral Operation MANUAL
Page
18
of
33
7.7 Contrast
CONTRAST is entered by pressing the [OK] button in the MAIN MENU and
scrolling to CONTRAST (Menu 7).
The factory setting is 50%.
Pressing [+] or [-] allows you to adjust the CONTRAST adjustment and pressing [OK] saves the required
CONTRAST and returns to the DDS screen.
7.8 Power/Mode
See 6.2 POWER/MODE (CONTROL PANEL OPERATION)
7.9 Pump Setting
PUMP SETTING is designed to protect your pump if there is no flow of water.
This means the time the pump is allowed to run after the water sensor on the
Cell detects there is no flow of water. The pump will be turned off from 3 to 10
minutes, after detecting no water flow.
PUMP SETTING is entered by pressing the [OK] button in the MAIN MENU and scrolling to PUMP
SETTING (Menu 9).
The default setting is 3 minutes and pressing [+] or [-] allows you to adjust the time the pump is turned
off for. Pressing [OK] saves the required protection time.
You can also select OFF and it will be disabled and will not stop the pump outlet.
7.10 Salt Test
See 6.6 SALT TEST (CONTROL PANEL OPERATION)
7.11 Service Menu
Please contact your distributor or your local pool Professional for further information.
7.12 Spa Mode
SPA MODE allows your unit to be adjusted to suit your spa.
SPA MODE is entered by pressing the [OK] button in the MAIN MENU and
scrolling to SPA MODE (Menu 12).
Pressing [+] or [-] allows you to adjust the SPA MODE settings from OFF to
ON and ON to OFF.
Selecting OFF setting leaves the OUTPUT SETTING at 100% and ON
changes the OUTPUT SETTING to 10%.
When SPA MODE is selected on the DDS screen will change as shown to the right.
Pressing [OK] saves the required settings and returns to the DDS screen.
7.13 Winter / Blanket Mode
See 6.4 WINTER / BLANKET MODE (CONTROL PANEL OPERATION)
Содержание CX15
Страница 1: ......
Страница 33: ...CX Chlorinator Salt and Mineral Operation MANUAL Page 31 of 31 15 NOTES...
