CX Chlorinator - Salt and Mineral Operation MANUAL
Page
16
of
33
6.7 BACKWASH
BEFORE ENTERING BACKWASH MODE YOU MUST BE IN THE DDS SCREEN.
[BACKWASH] button assists you in the operation of your pump and filter during the backwash
process.
IMPORTANT INFORMATION BEFORE PERFORMING A BACKWASH.
NEVER OPERATE THE FILTER LEVER WHILE THE PUMP IS RUNNING YOU MAY DAMAGE
THE SEAL AND LEAKS MAY OCCUR.
THE PUMP WILL START AND STOP AS YOU REQUIRE.
ENSURE ALL THE VALVES, VALVE HANDLE, LIDS, BASKETS, ETC. ARE IN THE IN THE
CORRECT POSITIONS AS PER THE REQUIREMENTS OF THE MANUFACTURERS OF
THAT EQUIPMENT.
[FILTER CLEAN] can also be entered by pressing the [OK] button in the MAIN MENU and
scrolling to BACKWASH MODE.
ALWAYS FOLLOW MANUFACTURERS INSTRUCTIONS.
IF UNSURE PERFORM MANUALLY BY PRESSING [POWER] ON&OFF TO
DO THE FILTER CLEAN.
During BACKWASH the [POWER] button displays the ON LED when the pump is running and the
OFF LED displays when the pump is stopped.
Pressing [OK] starts the pump for 2 minutes and TIME LEFT will be displayed
automatically counting down in 1 sec increments.
Once dirty water in the waste pipe or sight glass is clear press [OK] to finish.
RINSE MODE will then be displayed.
Pressing [OK] stops the pump and RINSE MODE is displayed.
Rotate the filter multi-port valve to the backwash position, ensure the handle
locks in place and once ready press [OK] to enter the RINSE MODE cycle.
Pressing [<] or [FILTER CLEAN] allows you to exit and this takes you to
BACKWASH COMPLETE.
Pressing the [OK] button starts the pump for 2 minutes.
TIME LEFT automatically starts counting down in 1 sec increments.
Once dirty water in the waste pipe or sight glass is clear then press [OK] to
finish RINSE MODE and enter BACKWASH COMPLETE MODE.
Pressing [OK] stops the pump and BACKWASH COMPLETED is displayed
Rotate the filter multi-port valve to the filter position, ensure the handle locks
in place and once ready press [OK] to enter the final BACKWASH
COMPLETED cycle.
Содержание CX15
Страница 1: ......
Страница 33: ...CX Chlorinator Salt and Mineral Operation MANUAL Page 31 of 31 15 NOTES...
