CX Chlorinator - Salt and Mineral Operation MANUAL
Page
10
of
33
5.5 Mineral or Salt Mix
MINERAL OR SALT MIX allows you to enter the type of mineral used in the
pool.
Pressing [+] or [-] will change it from SALT to MINERAL MIX.
The reason for this is because more minerals are required to be as conductive
as SALT.
Pressing [OK Pressing [OK] confirms your selection.
Pressing [<] returns you to the previous menu screen.
5.6 Default Display Screen
DEFAULT DISPLAY SCREEN (DDS) displays the screen to the right. This is
the actual output % of the unit.
Pressing [+] or [-] will increase the setting and the screen will change as seen
on the right.
This should always remain at 100% unless SPA MODE has been selected.
The (●) symbol indicates normal operation.
T2 is the default timer displaying “Dual Timer Cycle” and T1 displays “Single
Timer Cycle” when single timer is selected.
The Mode shows AUTO and this can be changed by pressing Power/Mode
(either AUTO,ON or OFF)
The time shows with HH:MM in 24hr clock format.
The cell status shows as FWD when the cell is in the forward direction and
REV when in the reverse direction.
The pump AC socket status is displayed, either ON or OFF.
The Water Temperature is displayed.
Any power failures return you to the DDS screen and the last saved MODE
is active.
Содержание CX15
Страница 1: ......
Страница 33: ...CX Chlorinator Salt and Mineral Operation MANUAL Page 31 of 31 15 NOTES...
