OAKWORKS Celesta Gemini CLODAGH, Инструкция по эксплуатации

Страница: 20 / 36

12
DIRECTIONS FOR USE
• Use & Adjustment of the
C
elesta
G
emini ™
Ar m Rests
DIRECTIONS FOR USE
D
IR
E
C
T
IO
N
S
F
O
R
U
S
E
To remove one or both arm rests just take hold of the base of the arm
rest at the metal frame and somewhere on the cushion. Holding secure-
ly, rotate the arm rest while at the same time pulling slightly away
from the table. You will feel the notched connection slide out as you
rotate the arm rest. When you feel this you can then slide the entire arm
rest out of the connection hole very easily. Store it safely inside the
under-table cabinet until ready for installation.
Re-attach the armrest by sliding the arm rest frame into the hole on the
tabletop and rotating the it until you feel the notch slip into place. Push
it in securely and allow the arm rest to rest in the parallel position. This
resets the arm rest in the proper position for the automatic adjustment
feature to be activated.
Removing the Side Arm Rests
Do not place excess weight
on the Side Arm Rests. DO
NOT use them in assisting
the client on and off the
C
elesta
G
emini ™
.
Either arm rest can be
repositioned to allow a
client to get on and off the
C
elesta
G
emini ™
.
™
easily.
When making adjustments
to the arm rests make
certain that the client’s
arms are away from the
working mechanism.
CAUTION
Do not sit on the Arm Rests.
SIDE ARM RESTS:
(
C O N T
.
)
• Side Arm Rests
(cont.)
IMPORTANT
8
If you have purchased the optional manicure arm rest please follow the
standard installation and removal instructions above.
OPTIONAL MANICURE ARM RESTS:
A. hand soak bowl installation
B. hand soak bowl removal
C. Manicure surface installation
A
B C