background image

pH 300 meter set up mode

27

26

Advanced set-up mode overview

P3.0: Viewing electrode data

In pH measurement mode:
• P3.1: pH electrode offset
• P3.2: pH electrode slope

In mV (or relative mV) measurement mode:
• P3.1: relative mV offset

P1.0: Memory clear 

• P1.0 Clear all stored readings

P2.0: Viewing previous calibration data 

• P2.1: First calibration point
• P2.2: Second calibration point
• P2.3: Third calibration point
• P2.4: Fourth calibration point
• P2.5: Fifth calibration point

Instructions on page 28

Instructions on page 36

Instructions on page 29

8.1

Instructions on page 30-31

P4.0: Unit configuration

• P4.1: Ready indicator on or off
• P4.2: # of calibration points: 2, 3, 4, or 5

P5.0: Reset to factory default

• P5.0: Reset to factory default settings

Instructions on pages 32-33

SETUP

MEM

pH

SETUP

pH

SETUP

SETUP

MEAS

SETUP

Press the SETUP key to enter Set up mode.

Press the 

and

keys to scroll through sub groups.

MEAS

SETUP

SETUP

pH 310 meter set up mode

P3.0: Viewing electrode data

In pH measurement mode:
• P3.1: pH electrode offset
• P3.2: pH electrode slope

In mV (or relative mV) measurement mode:
• P3.1: relative mV offset

P1.0: Memory clear 

• P1.0 Clear all stored readings

P2.0: Viewing previous calibration data 

• P2.1: First calibration point (plus time/date)
• P2.2: Second calibration point (plus time/date)
• P2.3: Third calibration point (plus time/date)
• P2.4: Fourth calibration point (plus time/date)
• P2.5: Fifth calibration point (plus time/date)
• P2.6: Sixth calibration point (plus time/date)-only

available when DIN buffer set is selected in P4.3

Instructions on page 28

Instructions on page 39

Instructions on page 29

Instructions on page 30-31

P4.0: Unit configuration

• P4.1: Ready indicator on or off
• P4.2: # of calibration points: 2, 3, 4, 5, or 6 (6th point

available for DIN buffer set only)

• P4.3: Select calibration buffer set: USA, DIN, or NIST
• P4.4: Select °C or °F

P6.0: Reset to factory default

• P6.0: Reset to factory default settings

Instructions on pages 32-35

Instructions on pages 37-38

SETUP

MEM

pH

SETUP

pH

SETUP

SETUP

P5.0: Setting Clock

• Setting year
• Setting date (month/day)
• Setting time (hour/minute/second)

http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products

Tel: (281) 359-8538  Toll Free:(866) 433-6682

Содержание pH 310

























Отзывы: