Oakton pH 310, Руководство по эксплуатации

Страница: 13 / 24

25 24
8. Advanced set up functions
SETUP MEM
pH
SETUP
pH
SETUP
SETUP
MEAS SETUP
SETUP MEM
pH
SETUP
pH
SETUP
SETUP
SETUP
MEAS SETUP
The advanced set up mode lets you customize your meter’s preferences and
defaults. Your OAKTON waterproof meter features different sub groups that
organize all set-up parameters.
The sub groups are:
1.
P1.0: Memory clear (CLR)
2.
P2.0: Viewing calibration data (CAL)
3.
P3.0: Viewing electrode data (ELE)
4.
P4.0: Unit configuration (COF)
5.
pH 300 only: P5.0: Reset to factory default settings (rSt)
pH 310 only: P5.0: Setting clock (CLO)
6.
pH 310 only: P6.0: Reset to factory default settings (rSt)
To recall readings:
1.
Press the MR key once to retrieve the
last reading stored. The memory location
screen—MEM, “Loc” and the memory
number—will flash on the display.
See figure
2.
Press the ENTER key to recall the read-
ing stored under that memory number.
See figure
3.
pH 300 meter only: Press the ENTER key
again to return to the “memory location”
screen.
pH 310 meter only: Press the ENTER
key again to view the date and time
the reading was taken. Press the
ENTER key again to return to the
“memory location” screen.
See figure
4.
The display automatically moves to
the next memory location screen.
See figure
5.
If necessary, press the
▲
key to select
the next “memory location” screen;
press the
▼
key to select the previous
“memory location” screen.
6.
Repeat steps 2-5 to review additional
stored data sets.
7.
To exit Memory Recall, press the MEAS
key to return to the Measurement mode.
Memory Recall
This function recalls the previous readings stored in the memory. You can only
access MR from the MEASurement mode. Memory recall is in “Last In First Out”
order.
7.2
MEM
B
pH
MEM
C
C
C
MEM
MEM
PM
D
E
E
D
Notes
Readings stored in memory are retained even if the unit is turned off. To erase all
readings stored in memory, use the SETUP mode P1.0 on page 28.
Time/date appears on pH 310 meter display only
pH 300 Advanced
set up subgroups
pH 310 Advanced
set up subgroups
B
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682