Oakcastle HIFI100, Инструкция по эксплуатации

Страница: 12 / 23

EN
Instruction Guide
10
FM & FM-Stereo R eception
- When listening to the FM radio, press the FM ST.
b
utton on remote control or
main unit to switch between stereo mode and mono mode. The FM stereo icon
“ST” will appear on the display if unit is in stereo mode. It is preferable to receive
the program in mono when you are receiving a weak station.
HINTS FOR BEST RECEPTION:
FM - For best FM reception, the FM lead wire antenna located on the back
of the unit should be fully unwrapped and extended
.
NOTE: Automatic tuning depends on the signal strength of the broadcasting
station, so weak stations may be skipped. You can manually tune to find the
weak stations if a station gets skipped. With strong signals, the tuner may stop
before it reaches the actual broadcast frequency, so you may need to manually
tune for the best reception.
PRESET RADIO STATIONS
1. Press the POWER/ STANDBY BUTTON on top of the main unit or on the
remote control to turn on the unit.
2. If it is not in FM radio mode, tap the MODE Button to select FM radio mode.
3. Tune to the desired radio station either by “manually” or “automatically”
tuning method.
4. Press and hold the PRESET/MEMORY Button on main unit or tap MEMORY
Button on remote control, display will show memory preset number “P01”
flashing and memory icon “PROG” showing in the LED display.
5. Tap the P+ or P- Button on remote control to select the preset
number you want to assign the station to.
6. Tap the MEMORY Button on remote control to confirm the setting.
7. Repeat above steps 4 - 6 to preset up to 30 FM stations.