Oakcastle HIFI100, Инструкция по эксплуатации

Страница: 11 / 23

Instruction Guide
9
EN
Instruction Guide
Wake to Radio, CD or Beeping Alarm
• When the alarm time is reached, the CD, radio or beeping alarm will sound
for the time you set then shut off and reset itself for the following day.
• To stop the alarm immediately after it sounds, press the b utton on
main
or remote control once. It resets itself for the following day.
• To cancel the following day alarm, tap the ALARM Button once,
ALARM
icon“ ” goes off
.
RADIO OPERATION
1. In Off (standby) mode, press the POWER/ STANDBY BUTTON on top of
the main unit or on the remote control to turn the unit ON.
2.
Tap the MODE Button to select FM Radio mode. The FM channel frequency
shown on the LED Display to confirm what mode you are in.
3.
To manually tune to a specific radio station, tap the or
b
utton
on either main unit or TUNE+ or TUNE-
b
utton on remote control repeatedly.
Use the manual tuning method to tune in weaker stations that are bypassed
during Automatic Tuning.
4.
To automatically tune to the next available radio station, press and hold the
or button
on main unit or TUNE+ or TUNE- Button on remote control for
1-
2 seconds until frequency readout on the display begins to scan and then
release the button. The tuner will stop scanning when it receives the next
broadcasting station of adequate signal strength.
5.
Press the volume control /–
b
utton on main unit or remote
control to adjust the volume to the desired level.