O2 COCOON, Руководство пользователя

Страница: 51 / 184

47
Camera settings
From the viewfinder screen select Options – Settings , then scroll through and change
the following
Flash
Change the settings for the flash on your O
2
Cocoon.
Auto flash The camera on your O
2
Cocoon will use the flash if required
Lantern Select to turn the light on permanently as you set the shot
Flash on The flash will go off each time you take a photo
Flash off Turn the flash off at all times
W/B (White Balance)
Change to fit the lighting environment, choose from Auto / Daylight / Tungsten /
Fluorescent.
Effect
Select to change the colour setting and alter the effect. Choose between Sepia /
Negative / B&W . Otherwise select Off for no effect at all
Self timer
Set the timer so you can be in the picture as well – you have 5 or 10 seconds to get
into the frame.
Change your mind and become camera shy – just select Off
Resolution
Select to change the resolution of the image you are to capture
Wallpaper Sets the image size to the lowest resolution available so you can save as
wallpaper
160 x 120 Sets the image size to 160 x 120 pixels
176 x 144 Sets the image size to 176 x 144 pixels
320 x 240 Sets the image size to 320 x 240 pixels
640 x 480 Sets the image size to 640 x 480 pixels. This is the maximum size you can
use when adding a funny frame
1024 x 768 Sets the image size to 1024 x 768 pixels
1280 x 1024 Sets the image size to 1024 x 1280 pixels
1600 x 1200 This is the largest resolution available and sets the image to 1600 x 1200,
or 2.0 mega pixels. The maximum size of a picture when taken at a resolution of
1600 x 1200 is 180Kb and fits perfectly within the current Media Messaging limit
of 300Kb.
Please note
If you take lower resolution images, you can send them in a media message, but
higher quality images will need to be transferred and viewed on your computer. You’ll
need to use the USB cable. Click here for details.
Click here to return to contents page.