O.S. engine GT120THU Скачать руководство пользователя

Страница: 9 / 21

8 / 20

(4) Inspection of the air filter

①

Check for the damages on the air filter: cracks, tears, wears, deformation, and deterioration. Replace the air

filter set in case of any damage.

②

Remove visible foreign objects from the surface of the air filter with fingers. Do not use compressed air

otherwise the air filter will get damage. Also, if you blow off the dust with compressed air from the outside

filter, the dust in the filer will come into the engine through the carburetor.

③

This is a wet type air cleaner. In case it gets dry or gets dust, wash and re-oil it as follows.

i) Loosen the hose clamp to remove the air cleaner unit.

ii) Wash the air filter using air filter cleaner available in the market. Follow the instructions of air filter

cleaners.

WARNING

Wash the air filter only outdoors or in well ventilated area away from any source of fire.

iii) After washing the air filter, dry and re-oil it with air filter oil available in the market. Follow the instructions

of air filter oil.

iv) Attach the air filter to the carburetor with the hose clamp with fastening torque of 1.0N

･

(5) Inspection of the spark plug cap and the high-tension cord

①

Remove the plug cap. Pull and shake the plug cap holding its body tight. Do not pull the high-tension cord

or use a screw driver to remove the plug cap from the spark plug. It may ruin the plug cap.

②

Check for tear and worn on the surface of the high-tension cord. In case the outer metal mesh is worn more

than 1/2 of its thickness, replace the whole ignition system. The high-tension cord cannot be replaced itself

alone. In case it is worn less than 1/2, use a spiral cord protector. In case string of the outer metal mesh is

cut considerably, more than 5 strings per 10mm cord length, replace the ignition system. If less, reinforce the

cord with a spiral cord protector.

③

Check if the caulking parts (Fig.2) come off. Make

sure to caulk the parts firmly. Send back the ignition

system for repair to us if it is requested.

④

Check if the ring is placed at the right position (Fig.2).

If the ring is damaged or lost, replace CODE

No.74002200 PLUG CAP SET.

⑤

Check for damage of the silicon part in the plug cap.

In case of damage, replace CODE No.74002200 PLUG

CAP SET.

⑥

Fit the plug cap on the spark plug after inspection.

(6) Inspection of the spark plug

①

Remove the spark plug using a 14mm spark plug socket removal tool available in the market.

②

Check for damages on the spark plug. Replace it if any damage on it.

③

Clean the center and ground electrodes with a wire brush.

④

Check the spark gap of NGK CM-6 spark plug. It should be 0.4 ~0.5

㎜

リング

/RING

Содержание GT120THU






















Результаты поиска

Содержание GT120THU

Отзывы:

Похожие инструкции для GT120THU

Бренды по названию

Популярные бренды

O.S. engine GT120THU, Руководство по обслуживанию

Результаты поиска

Содержание GT120THU

Отзывы:

Похожие инструкции для GT120THU

Бренды по названию

Популярные бренды