NXP Semiconductors TJA1055, Лист данных продукта

Страница: 10 / 26

TJA1055 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 5 — 6 December 2013 10 of 26
NXP Semiconductors
TJA1055
Enhanced fault-tolerant CAN transceiver
[1] All voltages are defined with respect to pin GND, unless otherwise specified. Positive current flows into the
device.
[2] Test set-up according to IEC TS 62228, section 4.2.4. Verified by an external test house to ensure pins can
withstand ISO 7637 part 1 & 2 automotive transient test pulses 1, 2a, 3a and 3b.
[3] Only relevant if V
WAKE
< V
GND

0.3 V; current will flow into pin GND.
[4] Junction temperature in accordance with “IEC 60747-1” . An alternative definition is: T
vj
= T
amb
+ P

R
th(vj-a)
where R
th(vj-a)
is a fixed value to be used for the calculation of T
vj
. The rating for T
vj
limits the allowable
combinations of power dissipation (P) and operating ambient temperature (T
amb
).
[5] Equivalent to discharging a 100 pF capacitor through a 1.5 k

resistor.
[6] The ESD performance of pins CANH, CANL, RTH and RTL, with respect to GND, was verified by an
external test house in accordance with IEC-61000-4-2 (C = 150 pF, R = 330

). The results were equal to,
or better than,

6 kV.
[7] Equivalent to discharging a 200 pF capacitor through a 10

resistor and a 0.75

H coil.
V
trt(n)
transient voltage on
pins CANH and CANL
[2]

150 +100 V
V
I(WAKE)
input voltage on pin WAKE with respect to any
other pin

0.3 +58 V
I
I(WAKE)
input current on pin WAKE
[3]

15 - mA
V
INH
voltage on pin INH

0.3 V
BAT
+ 0.3 V
V
RTH
voltage on pin RTH with respect to any
other pin

58 +58 V
V
RTL
voltage on pin RTL with respect to any
other pin

58 +58 V
R
RTH
termination resistance on
pin RTH 500 16000

R
RTL
termination resistance on
pin RTL 500 16000

T
vj
virtual junction temperature
[4]

40 +150

C
T
stg
storage temperature

55 +150

C
V
esd
electrostatic discharge
voltage human body model
[5]
pins RTH, RTL,
CANH and CANL

8 +8 kV
all other pins

2 +2 kV
IEC 61000-4-2
[6]
pins RTH, RTL,
CANH and CANL

6 +6 kV
machine model
[7]
any pin

300 +300 V
Table 6. Limiting values
…continued
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
Symbol Parameter Conditions Min Max Unit