NXP Semiconductors SAFE ASSURE FRDMGD31RPEVM Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 34

NXP Semiconductors SAFE ASSURE FRDMGD31RPEVM Скачать руководство пользователя страница 17

Your Global Source for RF, Wireless, IoT & Power Technologies

www.richardsonrfpd.com | 800.737.6937 | 630.262.6800

4/2022

NXP Semiconductors

UM11401

FRDMGD31RPEVM half-bridge evaluation board

5. Reboot the board by unplugging and replugging the connection to the

OpenSDA

port.

Verify now that the device appears as a KL25Z device to continue.

6. Locate the most recent KL25Z firmware; which is distributed as part of the FlexGUI

package.

a. From the FlexGUI install directory, which is located in the

flexgui-app-des-gd31xx\bin

folder and is named in the form

“flexgui-fw-KL25Z_usb_hid_gd31xxC_vx.x.x.bin”.

b. This .bin file is a product/family-specific configuration file for FRDM-KL25Z

containing the pin definitions, SPI/PWM generation code, and pin mapping

assignments necessary to interface with the translator board as part of

FRDMGD31RPEVM.

7. With the KL25Z still plugged through the

OpenSDA

port, copy/drag-and-drop the .bin

file into the KL25Z device memory. Once done, disconnect the USB and plug into the

other USB port, labeled

KL25Z

.

a. The device may not appear as a distinct device to the computer while connected

through the KL25Z USB port, this is normal.

8. The FRDM-KL25Z board is now fully set up to work with FRDMGD31RPEVM and the

FlexGUI.

a. There is no software stored or present on either the driver or translator boards,

only on the FRDM-KL25Z MCU board.

All uploaded firmware is stored in non-volatile memory until the reset button is hit on the

FRDM-KL25Z. There is no need to repeat this process upon every power up, and there is

no loss of data associated with a single unplug event.

6.3 Using the FlexGUI

The FlexGUI is available from

http://www.nxp.com/FlexGUI

as an evaluation tool

demonstrating GD31xx-specific functionality, configuration, and fault reporting. FlexGUI

also includes basic capacity for the FRDMGD31RPEVM to control an IGBT or SiC

module, enabling double pulse or short-circuit testing.
SPI messages can be realized graphically or in hexadecimal format. CSB is selectable to

address one or both GD31xx on the board via daisy chain. See

Figure 13

to

Figure 32

for

FlexGUI for GD31xx internal register read and write access.
Starting FlexGUI for GD31xx

•

FlexGUI install program (flexgui-app-des-gd31xx-0.x.x.exe)

•

Download FlexGUI and run the install program on your PC.

•

When you start the application,

Figure 13

allows you to select the target application

board, feature set (standard or daisy chain), target MCU, and USB interface. Leave all

settings as shown.

UM11401

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2021. All rights reserved.

User guide

Rev. 2 — 22 January 2021

17 / 34

«
...
15
16
17
18
19
...
»

Содержание SAFE ASSURE FRDMGD31RPEVM



































Отзывы:

Нет отзывов