NXP Semiconductors QorIQ FRDM-LS1012A, Справочное руководство, Страница: 5 / 31

Chapter 1
Overview
1.1 Introduction
The QorIQ FRDM-LS1012A board is an ultra-low-cost development platform for
LS1012A. The board provides connectivity support for SPI, UART, and I2C based
Arduino and freedom boards. Also, the FRDM-LS1012A supports the DDR3L memory,
two 1 Gbit/s Ethernet ports, one USB 3.0 5 Gbit/s port, and the Audio in and out
interface. The system is lead-free and RoHS-compliant.
The LS1012A processor is built on the LS architecture combining one ARM
®
A53
processor core with the datapath acceleration and network, peripheral interfaces required
for networking, wireless infrastructure, and the general-purpose embedded applications.
The FRDM-LS1012A onboard resources and debugging devices allow you to:
• Upload and run code
• Use the FRDM-LS1012A as a demonstration tool
A software application developed for the FRDM-LS1012A can run with various input/
output data streams, such as SGMII, SAI, or USB connections. The board support
package (BSP) is developed using the Linux operating system.
1.2 Related documentation
Table 1-1 lists the additional documents that you can refer to, for more information about
the FRDM-LS1012A.
Some of these documents may be available only under a non-disclosure agreement
(NDA). To request access to these documents, contact your local NXP field applications
engineer or sales representative.
QorIQ FRDM-LS1012A Board Reference Manual, Rev. 3, 12/2016
NXP Semiconductors 5