manualshive.com logo in svg

NXP Semiconductors PN7462AU, Быстрый старт

Поделиться
Скачать
NXP Semiconductors PN7462AU Скачать руководство пользователя страница 33

 

 

NXP Semiconductors 

UM10883 

 

PN7462 family Quick Start Guide - Development Kit 

UM10883 

All information provided in this document is subject to legal disclaimers. 

© NXP B.V. 2018. All rights reserved. 

User manual                                                                                    
COMPANY PUBLIC 

Rev. 1.6 — 14 May 2018                                                                             

319816 

33 of 120 

6.  NFC Cockpit getting started 

The NFC Cockpit is a Windows application designed to help explore the functionality of 
the PN7462 family and execute RF and antenna design related tests and 
parametrization. It allows a direct register access as well as EEPROM read and write 
access, and it allows to test and to calibrate the DPC and other features. 

6.1  Board preparation 

To use NFC Cockpit the PNEV7462B board must be configured to use USB host 
interface as described in Fig 18, which is the default configuration. The use of an external 
power supply is recommended as described in chapter 3.1. 

6.2  NFC Cockpit installation 

The NFC Cockpit can be downloaded from the NFC Cockpit product web page [4]. After 
successful download, follow the installation wizard and finish the installation. The default 
installation directory is 

C:\nxp\NxpNfcCockpit_vx.x.x.x, 

where 

x.x.x.x

 is version number. 

6.3  Firmware, EEPROM settings and driver 

NFC Cockpit requires a dedicated firmware running on the PN7462 family IC. This 
firmware application implements CDC USB class device (VCOM). The NFC Cockpit 
directs commands to the VCOM port and dedicated firmware executes commands on the 
hardware level. An optional part of the same firmware binary is also the Secondary 
Firmware application typically featuring some dedicated compliance test application that 
needs to meet specific time constraints (for example EMVCo loopback). The Secondary 
application can be started and stopped trough the NFC cockpit GUI from the primary part 
of the Firmware application. During the execution of the Secondary application the 
standard NFC Cockpit features are not available, this is because the execution flow is 
transferred to the Secondary application. 

NFC Cockpit firmware can be updated by using primary downloader functionality - MSD 
mode (see chapter 8.10). Firmware binary is available with NFC Cockpit installation and 
located in 

“<installation directory>\firmware\PN7462AU

”. 

Additionally, appropriate EEPROM settings needs to be updated, the EEPROM settings 
binary is located in 

“<installation directory>\firmware\PN7462AU”. 

The

 

EEPROM binary 

is also updated by using primary downloader functionality (see chapter 8.10). 

USB drivers needed for NFC Cockpit are part of the installation package and are 
automatically installed. 

6.4  NFC Cockpit getting started 

After starting the NFC Cockpit Windows application, the communication link between the 
PC and the PNEV7462B (via USB interface) is established automatically.  

Fig 35 shows the activation of a MIFARE DESFire card with the following steps: 

(1)  click the <Load Protocol> button  

(2)  click the <Field On> button  

(3)  click the <Activate Layer3> button  

Содержание PN7462AU


























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды