
NXP Semiconductors
UM11705
PCF85063TP-ARD evaluation board
1 Introduction
This document describes the PCF85063TP-ARD demo board. The evaluation board
is built around the PCF85063TP IC and works as a daughter card which can be
connected through an Arduino port to various Arduino compatible (including original
Arduino Uno R3) boards. The board is intended to test and measure the characteristics
of the PCF85063TP low power, tiny real-time clock/calendar, produced by NXP
Semiconductors.
The RTC communicates with the controller / microprocessor through a bidirectional
Fm I
2
C-bus. Among the device under test (DUT) IC, the board is equipped with an
Arduino port and the necessary components for easy testing, shortening the time to
make measurements and check operation of the PCF85063TP IC.
Additionally, the daughter board has software support and a graphical user interface
(Windows platform) for the following NXP evaluation boards: IMXRT1050 EVK Board,
LPCXpresso55S69 Development Board and i.MX 8M Mini LPDDR4 EVK Board.
2 Finding kit resources and information on the NXP web site
NXP Semiconductors provides online resources for evaluation board and its supported
device(s) on
The information page for PCF85063TP-ARD evaluation board is at http://
. The information page provides overview information,
documentation, software and tools, parametrics, ordering information and a
Getting
Started
tab. The Getting Started tab provides quick-reference information applicable
to using the PCF85063TP-ARD evaluation board, including the downloadable assets
referenced in this document.
2.1 Collaborate in the NXP community
The NXP community is for sharing ideas and tips, ask and answer technical questions,
and receive input on just about any embedded design topic.
The NXP community is at
3 Getting ready
Working with the PCF85063TP-ARD requires the kit contents, additional hardware, and a
Windows PC workstation with installed software.
3.1 Kit contents
•
Assembled and tested evaluation board in an antistatic bag
•
Quick Start Guide
3.2 Assumptions
Familiarity with the I
2
C bus is helpful but not required.
UM11705
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1.0 — 19 November 2021
4 / 24