4
Quick Start Guide
MTRCKTSPS5744P
FEATURES
•
NXP MPC5744P MCU Controller
Board with JTAG and NEXUS
debug interface
•
3-phase low-voltage power stage
based on
SMARTMOS
®
MC33937A pre-
driver
•
Supports low-voltage PMSM
motors with resolver position
sensor
•
DC-bus overvoltage, overcurrent,
and undervoltage fault detection
•
ANSI-C based example Software
and Hardware in S32DS IDE for
Power Architecture-based MCUs
•
FreeMASTER Tool for Project
visualization
•
MCAT tool 1.0 part of S/W
package
•
Extensive documentation for
S/W and H/W
STEP-BY-STEP
INSTRUCTIONS
This section covers software download,
development kit setup, and application
control.
Install the FT230x virtual COM port driver.
Visit
ftdichip.com/drivers/vcp.htm
to
download the correct driver. Select the
virtual COM port (VCP) driver based on your
operating system and processor
architecture.
Download installation software
and documentation under
“MPC56xx/MPC57xx
Development Kits”
at
nxp.com/automcdevkits
Download
Software
Download Necessary
Drivers
2
1
