NXP Semiconductors
UM11650
KIT-TPLSNIFEVB tool
aaa-042711
HARDWARE
SETUP
HARDWARE
SETUP
OPTIONAL
POWER
BANK
HARDWARE
SETUP
Hardware setup without TPL sniffer:
HARDWARE
SETUP
TPL sniffer
KIT-TPLSNIFEVB
COMPUTER
LOGIC
ANALYZER
Two-twisted-wire
TPL cable
Two-twisted-wire
TPL cable
Two-twisted-wire
TPL cable (optional-in case
of daisy chain)
TPL bus
TPL bus
USB cable
or
With optional:
- Saleae Logic Analyzer Software
- NXP TPL analyzer DLL
Micro-USB
port
8 pin-connectors cable
Figure 2. TPL sniffer toolchain
Note:
This product has not undergone formal EU EMC assessment. As a component
used in a research environment, it will be the responsibility of the user to ensure the
finished assembly does not cause undue interference when used and cannot be CE
marked unless assessed.
2 Finding kit resources and information on the NXP web site
NXP Semiconductors provides online resources for this evaluation board and its
supported device(s) on http://www.nxp.com.The information page for KIT-TPLSNIFEVB
tool is at
http://www.nxp.com/KIT-TPLSNIFEVB
. The information page provides overview
information, documentation, software and tools, parametrics, ordering information and
a Getting Started tab. The Getting Started tab provides quick-reference information
applicable to using the KIT-TPLSNIFEVB tool, including the downloadable assets
referenced in this document.
Collaborate in the NXP community
The NXP community is for sharing ideas and tips, ask and answer technical questions,
and receive input on just about any embedded design topic.
The NXP community is at
3 Getting ready
3.1 Kit contents
•
Assembled and tested TPL sniffer dongle in anti-static bag
•
A logic analyzer connection cable with 8-pin headers
•
A TPL bus connection twisted cable with 2-pin headers
UM11650
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1 — 4 August 2021
4 / 14
