manualshive.com logo in svg

NXP Semiconductors KE17Z Series, Руководство пользователя, Страница: 36 / 37

Поделиться
Скачать
NXP Semiconductors KE17Z Series Скачать руководство пользователя страница 36

Translations — A non-English (translated) version of a document, including 
the legal information in that document, is for reference only. The English 
version shall prevail in case of any discrepancy between the translated and 
English versions.

Security — Customer understands that all NXP products may be subject to 
unidentified vulnerabilities or may support established security standards or 
specifications with known limitations. Customer is responsible for the design 
and operation of its applications and products throughout their lifecycles 
to reduce the effect of these vulnerabilities on customer’s applications 
and products. Customer’s responsibility also extends to other open and/or 
proprietary technologies supported by NXP products for use in customer’s 
applications. NXP accepts no liability for any vulnerability. Customer should 
regularly check security updates from NXP and follow up appropriately.

Customer shall select products with security features that best meet rules, 
regulations, and standards of the intended application and make the 
ultimate design decisions regarding its products and is solely responsible 
for compliance with all legal, regulatory, and security related requirements 
concerning its products, regardless of any information or support that may be 
provided by NXP.

NXP has a Product Security Incident Response Team (PSIRT) (reachable 
at 

[email protected]

) that manages the investigation, reporting, and solution 

release to security vulnerabilities of NXP products.

Trademarks

Notice: All referenced brands, product names, service names, and 
trademarks are the property of their respective owners.

NXP — wordmark and logo are trademarks of NXP B.V.

AMBA, Arm, Arm7, Arm7TDMI, Arm9, Arm11, Artisan, big.LITTLE, Cordio, 
CoreLink, CoreSight, Cortex, DesignStart, DynamIQ, Jazelle, Keil, Mali, 
Mbed, Mbed Enabled, NEON, POP, RealView, SecurCore, Socrates, Thumb, 
TrustZone, ULINK, ULINK2, ULINK-ME, ULINK-PLUS, ULINKpro, μVision, 
Versatile — are trademarks or registered trademarks of Arm Limited (or its 
subsidiaries) in the US and/or elsewhere. The related technology may be 
protected by any or all of patents, copyrights, designs and trade secrets. All 
rights reserved.

Airfast — is a trademark of NXP B.V.

Bluetooth — the Bluetooth wordmark and logos are registered trademarks 
owned by Bluetooth SIG, Inc. and any use of such marks by NXP 
Semiconductors is under license.

Cadence — the Cadence logo, and the other Cadence marks found at 

www.cadence.com/go/trademarks

 are trademarks or registered trademarks of 

Cadence Design Systems, Inc. All rights reserved worldwide.

CodeWarrior — is a trademark of NXP B.V.

ColdFire — is a trademark of NXP B.V.

C — is a trademark of NXP B.V.

EdgeLock — is a trademark of NXP B.V.

EdgeScale — is a trademark of NXP B.V.

EdgeVerse — is a trademark of NXP B.V.

elQ — is a trademark of NXP B.V.

FeliCa — is a trademark of Sony Corporation.

Freescale — is a trademark of NXP B.V.

HITAG — is a trademark of NXP B.V.

ICODE and I-CODE — are trademarks of NXP B.V.

Immersiv3D — is a trademark of NXP B.V.

I2C-bus — logo is a trademark of NXP B.V.

Kinetis — is a trademark of NXP B.V.

Layerscape — is a trademark of NXP B.V.

Mantis — is a trademark of NXP B.V.

MIFARE — is a trademark of NXP B.V.

MOBILEGT — is a trademark of NXP B.V.

NTAG — is a trademark of NXP B.V.

Processor Expert — is a trademark of NXP B.V.

QorIQ — is a trademark of NXP B.V.

SafeAssure — is a trademark of NXP B.V.

SafeAssure — logo is a trademark of NXP B.V.

StarCore — is a trademark of NXP B.V.

Synopsys — Portions Copyright 

©

 2021 Synopsys, Inc. Used with permission. 

All rights reserved.

Tower — is a trademark of NXP B.V.

UCODE — is a trademark of NXP B.V.

VortiQa — is a trademark of NXP B.V.

NXP Semiconductors

Legal information

KE17Z Dual TSI User Guide, Rev. 0, 05 May 2022

User Guide

36 / 37

Содержание KE17Z Series






































Отзывы:

Нет отзывов