NXP Semiconductors JN516x-EK001, Руководство пользователя, Страница: 11 / 86

JN516x-EK001 Evaluation Kit
User Guide
JN-UG-3093 v1.5 © NXP Laboratories UK 2015 11
1.2 Kit Contents
The JN516x-EK001 Evaluation Kit contains the hardware components required to
assemble a wireless network which may be connected to an IP-based network (such
as the Internet). The principal network components included in the kit are:

Carrier Boards which host a JN5168 module and which can be fitted with the
supplied Expansion Boards (see below) to achieve the desired functionality

Expansion Boards which can be mounted on the Carrier Boards in order to
provide them with the required functionality: Lighting/Sensor, LCD or Generic

USB Dongles featuring a JN5168 wireless microcontroller

Remote Control Unit featuring a JN5168 wireless microcontroller

Border-Router which allows the wireless network to be connected to an

IP-based network - this component is based on one of the following devices:

Raspberry Pi single-board computer

Linksys router
A Border-Router is formed from one of the above devices and a USB Dongle.
Other components of the kit depend on whether the Raspberry Pi board or Linksys
router is supplied. The contents of the two variants of the kit are detailed separately in
Section 1.2.1 and Section 1.2.2 . The supplied configurations of the Carrier Boards (in
terms of JN5168 modules and expansion boards) are detailed in Section 1.2.3 .
1.2.1 Kit Containing Raspberry Pi
In this kit, you will find the following components (numbers refer to Figure 4 ):
1. Raspberry Pi single-board computer (Model B+) and microSD Card
2. 5V DC power supply unit (universal type) for Raspberry Pi
3. 12V DC power supply unit (universal type) for Carrier Boards
4. RJ45 Ethernet cable
5. 2 JN5168 USB Dongles with integrated antenna (DR1198)
6. 4 Carrier Boards (DR1174):

1 pre-fitted with a Generic Expansion Board (DR1199) and a

JN5168 standard-power module with uFL connector (JN5168-001-T03)

3 pre-fitted with a Lighting/Sensor Expansion Board (DR1175) and a
JN5168 standard-power module - two with integrated antenna

(JN5168-001-T00), one with uFL connector (JN5168-001-T03)
7. Generic Expansion Board (DR1199)
8. LCD Expansion Board (DR1215)
9. 4 JN5168 high-power modules with uFL connector:

2 JN5168-001-T05 modules for worldwide use

2 JN5168-001-T06 modules for use in North America (FCC and IC) only