NXP Semiconductors arm LPCXpresso55S36, Руководство пользователя

Страница: 4 / 46

NXP Semiconductors
LPCXpresso55S36UM
LPCXpresso55S36 Development Board User Manual
LPC55S36 /
LPC5536
CAN FD
DB9
Monitor sensor
Audio codec
User LEDs
HS SPI
I3C
SEC GPIO
GPIO
PWM
COMP
Expansion
connectors
mikroBUS
I2C (ISP)
SWD/SDO
SPI (ISP)
HS USB
micro-B
Xtal
16 MHz
Xtal
32.768 kHz
USART
header
CAN
transceiver
I2S
External power
USB micro-B
FS USB
micro-AB
Buffer
ADC
I2C
Buffer
MCU-Link
User butttons
Buffer
UART (ISP)
Buffer
Buffer
Figure 1. LPCXpresso55S36 block diagram
1.5 Board features
The table below describes the features of the LPCXpresso55S36 board.
Board feature Target MCU feature used Description
MCU (target MCU) LPC5536 MCU with 32-bit Arm Cortex-M33 core running at
a frequency of up to 150 MHz
Note: For details on the LPC5536 MCU, see LPC553x Data
Sheet and LPC553x Reference Manual .
USB
USB 2.0 full-speed host and device
controller (USB0)
A USB micro-AB connector for the target MCU USB0
connection. The board also provides a USB micro-B
connector as a power-only connector and another USB
micro-B connector for MCU-Link.
USART Flexcomm modules 0 and 2
• FC0 USART connection is supported as:
– An external UART connection from a 1x3 pin header or
a USB-to-UART bridge for connecting MCU-Link to the
target MCU
– An external UART connection from one of the
connectors of Motor 2 + Arduino socket
•
FC2 USART connection is supported as an external
UART connection from one of the connectors of mikroBUS
socket
Table 4. LPCXpresso55S36 features
LPCXpresso55S36UM All information provided in this document is subject to legal disclaimers. © NXP B.V. 2022. All rights reserved.
User manual Rev. 2 — 5 September 2022
4 / 46