manualshive.com logo in svg

NXP Semiconductors 56F8367, Руководство пользователя

Устройство NXP Semiconductors 56F8367 - микроконтроллер нового поколения, обеспечивающий высокую производительность и надежность. Для получения подробной информации и настройки устройства, вы можете бесплатно загрузить руководство пользователя на manualshive.com. Получите всю необходимую информацию для использования микроконтроллера 56F8367.

Поделиться
Скачать
background image

How to Reach Us:

Home Page:

www.freescale.com

E-mail:

[email protected]

USA/Europe or Locations Not Listed:

Freescale Semiconductor
Technical Information Center, CH370
1300 N. Alma School Road

 

Chandler, Arizona 85224

 

+1-800-521-6274 or +1-480-768-2130
[email protected]

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
[email protected]

Japan:

Freescale Semiconductor Japan Ltd.

 

Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku,
Tokyo 153-0064, Japan
0120 191014 or +81 3 5437 9125
[email protected]

Asia/Pacific:

Freescale Semiconductor Hong Kong Ltd.
Technical Information Center

 

2 Dai King Street

 

Tai Po Industrial Estate

 

Tai Po, N.T., Hong Kong

 

+800 2666 8080
[email protected]

For Literature Requests Only:

Freescale Semiconductor Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1-800-441-2447 or 303-675-2140
Fax: 303-675-2150
[email protected]

Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, 
Inc. All other product or service names are the property of their respective owners.

 

This product incorporates SuperFlash® technology licensed from SST.
© Freescale Semiconductor, Inc. 2005. All rights reserved.

MC56F8367EVMUM
Rev. 2
07/2005

Information in this document is provided solely to enable system and 
software implementers to use Freescale Semiconductor products. There are 
no express or implied copyright licenses granted hereunder to design or 
fabricate any integrated circuits or integrated circuits based on the 
information in this document.

Freescale Semiconductor reserves the right to make changes without further 
notice to any products herein. Freescale Semiconductor makes no warranty, 
representation or guarantee regarding the suitability of its products for any 
particular purpose, nor does Freescale Semiconductor assume any liability 
arising out of the application or use of any product or circuit, and specifically 
disclaims any and all liability, including without limitation consequential or 
incidental damages. “Typical” parameters that may be provided in Freescale 
Semiconductor data sheets and/or specifications can and do vary in different 
applications and actual performance may vary over time. All operating 
parameters, including “Typicals”, must be validated for each customer 
application by customer’s technical experts. Freescale Semiconductor does 
not convey any license under its patent rights nor the rights of others. 
Freescale Semiconductor products are not designed, intended, or authorized 
for use as components in systems intended for surgical implant into the body, 
or other applications intended to support or sustain life, or for any other 
application in which the failure of the Freescale Semiconductor product could 
create a situation where personal injury or death may occur. Should Buyer 
purchase or use Freescale Semiconductor products for any such unintended 
or unauthorized application, Buyer shall indemnify and hold Freescale 
Semiconductor and its officers, employees, subsidiaries, affiliates, and 
distributors harmless against all claims, costs, damages, and expenses, and 
reasonable attorney fees arising out of, directly or indirectly, any claim of 
personal injury or death associated with such unintended or unauthorized 
use, even if such claim alleges that Freescale Semiconductor was negligent 
regarding the design or manufacture of the part. 

Содержание 56F8367


















































































Отзывы:

Нет отзывов

Похожие инструкции для 56F8367

Abit KG7-RAID User Manual preview
KG7-RAID
Бренд: Abit Страницы: 104
AOpen MX3W Pro Online Manual preview
MX3W Pro
Бренд: AOpen Страницы: 156
Elitegroup Computer Systems P6VXM2T Manual preview
P6VXM2T
Бренд: Elitegroup Computer Systems Страницы: 82
IBASE Technology MI941 User Manual preview
MI941
Бренд: IBASE Technology Страницы: 64
MSI B85M-P32 series User Manual preview
B85M-P32 series
Бренд: MSI Страницы: 186
Commell LE-575 User Manual preview
LE-575
Бренд: Commell Страницы: 61
Intel EMX-965GME User Manual preview
EMX-965GME
Бренд: Intel Страницы: 43
Shuttle MB47N User Manual preview
MB47N
Бренд: Shuttle Страницы: 80
Microchip Technology MIC2128 User Manual preview
MIC2128
Бренд: Microchip Technology Страницы: 31
JETWAY V266DMU User Manual preview
V266DMU
Бренд: JETWAY Страницы: 48
ASROCK Z590 Taichi Manual preview
Z590 Taichi
Бренд: ASROCK Страницы: 257
ON Semiconductor NCP4306 User Manual preview
NCP4306
Бренд: ON Semiconductor Страницы: 7
Gigabyte GA-H270-HD3 User Manual preview
GA-H270-HD3
Бренд: Gigabyte Страницы: 44
SMSC EVB-USB3280 User Manual preview
EVB-USB3280
Бренд: SMSC Страницы: 4
Intel D845EPI Product Manual preview
D845EPI
Бренд: Intel Страницы: 87
SLEIPNER MOTOR AS SIDE POWER SRH 240 TC Installation Manual preview
SIDE POWER SRH 240 TC
Бренд: SLEIPNER MOTOR AS Страницы: 28
Texas Instruments bq2083EVM-001 User Manual preview
bq2083EVM-001
Бренд: Texas Instruments Страницы: 33
Texas Instruments ADS54J42 User Manual preview
ADS54J42
Бренд: Texas Instruments Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды