background image

VME Subrack System 7 U

Service

20836-715/-718

www.schroff.biz

18

R1.1, November 14, 2008

4  Service

4.1  Technical support and Return for Service Assistance

For all product returns and support issues, please contact your Schroff sales 
distributor or 

www.schroff.biz

.

We recommend that you save the packing material. Shipping without the original 
packing material might void the warranty.

4.2  Declaration of Conformity

Microcomputer packaging systems are not complete units which can be 
delivered directly to the end user, other items need to be fitted.

As it is defined in the EMC standard, it is not designated as a device.
A CE symbol is therefore not required. However, the systems comply with all 
requirements. Each individual component complies to the EMC standard
89/336/EWG and to the low frequency standard 73/23/EWG.

These systems are generally equiped with power supplies having the
CE symbol (EN 60950, EN 61000-6-3, EN 61000-6-2).

The choice of the mains filter is carried out by considering the limited values‘ 
curve, according to EN 55022 class B.

To warrant the interference immunity according to EN 61000-6-2, the shielding 
attenuation is measured in the frequency range from 30 MHz to 1000 MHz 
according to VG 95 373, Part 15.

The systems are developped and manufactured according to EN 60950. High-
voltage tests, protective earth tests and functions tests are done on each series 
system.

Содержание 20836-715





























Отзывы: