nVent Hoffman X2302, Инструкция по эксплуатации

Страница: 24 / 28

24
|
nVent.com/HOFFMAN
Cleaning Instructions:
1. Flush the filter with warm water from the exhaust side to the intake side.
Do not use caustics .
2. After flushing, allow filter to drain. Placing it with a corner down will assure
complete drainage.
3. Recoat the filters with RP Super Filter Coat adhesive. When spraying filter
do so from both sides for maximum concentration of adhesive.
CAUTION:
Operation of the air conditioner in areas containing airborne caustics or chemicals can rapidly deteriorate filters, condenser coils, blowers
and motors, etc. Contact nVent Equipment Protection for special recommendations.
Refrigerant loss
Each air conditioner is thoroughly tested prior to leaving the factory to insure against refrigeration leaks. Shipping damage or microscopic
leaks not found with sensitive electronic refrigerant leak detection equipment during manufacture may require repair or recharging of the
system. This work should only be performed by qualified professionals, generally available through a local, reputable air conditioning repair
or service company.
Refer to the data on the nameplate which specifies the type of refrigerant and the charge size in ounces.
Before recharging, make sure there are no leaks and that the system has been properly evacuated into a deep vacuum.