Page 7
®
Installation & Operating Instruction Manual
Mounting Installation:
Turn the power off at the breaker
panel, and confirm that it is de-
energized before installing.
1. Position the cover in place.
2. Plug the Controller into the
lower receptacle
, lining up the
Screw with the Receptacle.
3. Fasten the Screw
to secure the
Controller in place. Do not
overtighten.
4. Turn the power back on, and
confirm correct operation.
Note:
If the remaining receptacle above the Controller is being used, the total
load must not exceed the circuit’s rating.
Additional Installation Requirements
Plug the Control Box into a standard wall
outlet beneath the tub.
The Control Box must be installed with the
nipple located in the lower right-hand
corner.
The Controller must be installed on a vertical surface with a 6” clearance on all
sides for ventilation.
The underside tub temperature must not exceed 122°F (50°C).
1
2
3
