![NuWhirl TOUCHSTONE CSLC-317-02-01-01 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/nuwhirl/touchstone-cslc-317-02-01-01/touchstone-cslc-317-02-01-01_installation-and-operating-manual_1720515013.webp)
Page 13
®
Installation & Operating Instruction Manual
Configuration #10
—
Variable Speed Blower
w/ Oscillation Option (No Light)
The Air System is activated by pressing the “Air” Air Button. The
Air System runs independently of the Tub Water Level. This will
turn on the Blower at high speed and activate its 30-minute timer.
Press again to turn off.
To reduce speed, Press and Hold to ramp down and release at desired speed. A
Subsequent Press-and-Hold resets the load to High Speed and Ramp Down
sequence. The Oscillate feature is activated if the button is held for 2 seconds after
reaching the “Low” speed in the speed ramp. The system will stop automatically
when the timer expires.
Configuration #11
—
Dual Speed Blower
(No Light)
The Air System is activated by pressing the “Air” Air Button. The
Air System runs independently of the Tub Water Level. This will
turn the Blower on at high speed and activate its 30-minute timer.
Pressing the Button a second time will cycle the Blower to low
speed. Pressing the Button a third time turn the Blower off.
Configuration #12
—
Variable Speed Blower
w/ Oscillation Option (No Light, 24 Hour Purge Cycle)
The Air System is activated by pressing the “Air” Air Button. The
Air System runs independently of the Tub Water Level. This will
turn on the Blower at high speed and activate its 30-minute timer.
Press again to turn off.
To reduce speed, Press and Hold to ramp down and release at desired speed. A
Subsequent Press-and-Hold resets the load to High Speed and Ramp Down
sequence. The Oscillate feature is activated if the button is held for 2 seconds after
reaching the “Low” speed in the speed ramp. The system will stop automatically
when the timer expires.
CAUTION
Do not run Whirlpool Water Systems dry. Always be certain
that the pump casing is filled with water before starting the unit.
Air Systems Automatic Dry Cycle
For all Configurations except for
Configuration 11, thirty minutes after the Air Blower is turned off, it will
automatically come on for 1 minute. For Configuration 11, this cycle will occur
automatically once per 24 hour period. This will purge out any residual moisture
in the air system, making the system fresh and ready for the next bath.