Nu-Link-Gang
Dec. 23, 2019
Page
15
of 37
Rev 1.00
NU
-LINK
-GA
NG
USE
R MA
NU
AL
3.4
Connect to the Target Chip
3.4.1 Nuvoton ICP Gang Adapter
Connect the Nuvoton ICP Gang Adapter to Nu-Link-Gang as Figure 3-4. Put the target chip into the
socket. Pin 1 is on the bottom-left hand side.
Figure 3-4 Nuvoton ICP Gang Adapter with Nu-Link-Gang
3.4.2 Customized Adapter Board
Follow Figure 3-5 to connect the adapter board and the Nu-Link-Gang slot. The slot VCC pin voltage
is set by the programming voltage switch.
The recommended wiring between adapter board and the Nu-Link-Gang is using stranded conductors
with AWG size 24 and length 50 cm.
Figure 3-5 Slot Pin Description
