16
Record Interval Setting
If you would like to modify the recording time interval between frames, go to the Record
menu. Select Record Control. Here, you are allowed to set all recording intervals to the
nearest minute or second as desired. The default is set at 1 second interval between frames.
If you are using Auto Recording functions, you can use this same window to setup the
intervals between frames. You have to select AutoR Setting before adjusting the intervals.
This is illustrated as follows:
However, due to system performance limitations, certain combinations may not operate as
desired. Your hard disk may not operate fast enough at this rate. Under this condition, the
system will try to record as fast as your system can handle.