10
ARMED SECURITY SYSTEM DEFAULT
DigiGuard is set with an armed security default. Firstly, the Activate server button is
always depressed upon start-up: showing that the server is alert. The server software is set
at default with Alarm On and Alarm Call On both selected. If you want to exit the
software, both of these selections has to be deselected and all operations stopped.
Each time the software is started up, most of the buttons are grayed. The software is said
to be in its locked state. To unlock it, you need to enter any of the two passwords. The
software comes with a safety feature so that you can lock the software up at any time. No
one will be able to exit the software without unlocking it with the correct password.
Other image quality settings including image resolution, compression and image size
are set in such a way that a general optimum result can be obtained.
THE TOOL BAR OF THE SERVER
Note: The Alarm button will only appear during an Alarm situation.
