Nuvico TE-100-4M, Руководство пользователя

Страница: 38 / 60

33
Encoder User Manual
Either method of network connection can be used. If PPPoE is used to connect internet, the
device will get a dynamic WAN IP address. This IP address will change frequently. To be
notified, the IP change notification function can be used.
Click “IP Change Notification Config” to go to the interface as shown below.
Trigger Email : when the IP address of the device is changed, the new IP address will be sent
to the email address that has been set up.
Trigger FTP : when the IP address of the device is changed, the new IP address will be sent to
FTP server that has been set up.
4.6.2
Port
Go to Config
→
Network
→
Port interface as shown below.
HTTP Port : The default HTTP port is 80. It can be changed to any port which is not occupied.
HTTPS Port : The default HTTPs port is 443. It can be changed to any port which is not
occupied.
Data Port : The default data port is 9008. It can be changed to any port which is not occupied.
RTSP Port : The default port is 554. It can be changed to any port which is not occupied.
4.6.3
Server Configuration
This function is mainly used for connecting network video management system.