Nuvico HR-1600, Инструкция по эксплуатации, Страница: 56 / 86

57 HR Series NVR
7.2. I/O Terminal
This NVR supports 4 Alarm Inputs and 1 x Relay Outputs.
1. Use the Left/Right buttons [ ] to select “I/O Terminal” menu tab. The menus are
displayed with options in the left-hand column and settings in the right hand column. A
cursor (highlighted menu) can be moved using the directional buttons [ ].
2. SENSOR INPUT: Change the input type. Use the [-, +] buttons to change the values.
Note. Alarm of IP camera can be configured in CAMERA menu (Chapter 2.2)
3. RELAY OUTPUT: you can configure how the Relay Outputs are controlled: automatic or
manual.
1) Use: Change the output type.
2) Inactive: Select turn off method of Relay Out.
a. Event (Automatic): Relay Out is turned OFF when the event expires. This setting
is configured globally.
b. Manual: Relay Out is turned OFF from this menu <Control>.
3) Event Edit
- Press [OK] to edit multiple events. The menus are displayed with options in the left-
hand column and settings in the right hand column. A cursor (highlighted menu) can
be moved using the directional buttons [ ] on the IR remote or front panel.
- Change the options below using the [DEC/INC] buttons on the IR remote, or click