Nuvico HR-1600, Инструкция по эксплуатации, Страница: 22 / 86

21 HR Series NVR
2. Multi-screen Display and Sequencing
2.1. Screen Display.
Select any camera for Full screen display by pressing the Number button of the
desired camera. for 12ch, press 1 then 2.
2.2. Multi-screen Display and Switch Sequencing Display.
1) Press [DISPLAY] buttons to activate the multiscreen display. It is changed the
order as shown below among your choice of SPLIT MODE.
2) To start Auto Sequence, press [DISPLAY] buttons for 2 seconds to begin full
screen sequencing.
Click this ICON by Mouse and spot out button on the remote control,
you will see following virtual controller
Main Monitor
Spot Monitor
3) The Auto sequence mode and dwell times are programmable in Switch set up.
For detailed information about configuring those, see “Switch Setup”. If the
sequence mode is not stopped, it moves to split mode instead of Sequencing.
Auto Sequence Status
Auto Sequence
SPLIT MODE