Nuvico HR-1600, Инструкция по эксплуатации, Страница: 49 / 86

50 HR Series NVR
4. E-mail Source: Event must be specified using notification options.
1) Event Edit. Notifications can be enabled for each channel for Alarm, Motion, Video
Loss and System (HDD Fail, Record Fail, HDD Full etc.). Press the [OK] button to
select.
5. Log: This NVR will mail Log List at selected intervals.
6. Attach Picture: While in recording mode, a picture can be attached to mail.
7.
E-mail Address: 5 mail addresses can be configured for mail notification.
6.4. SMTP
This menu is activated when you check <SMPT> on EMAIL.
The following settings are only needed if you are NOT using the NVR mail server.
1. Server: Enter the e-mail server name or IP address. To set server name, use the
virtual keyboard, or press the appropriate numeric button on IR Remote or front panel.
2. Port: Define the port the SMTP server will communicate through. By default, it is set
to 25.
3. Authentication: Check this <ON> if your mail server requires authentication.
4. User ID & Password: Enter the user ID/name and password for the SMTP Server.
(Distinguish Upper and Lower Case : use Lower case by Front or IR remote, press
[OK] button at this cell, virtual keyboard will be pops up.)
5. Send Test: Test to send e-mail.