26.2
ø5.0
ø15
ø5.0
112
70
120
∆
120
∆
109
ST4x30
ST4x12 or M4x10
Surface Mount
Surface Mount Template
Flush Mount Template
Plastic Dowels
Plastic Anchors
Flush Mount
ST4x30
A
A'
1
2
3
Philips M4x9 or
Torx M4x9
Mounting Housings to Electrical Junction Boxes
8 •
Base Installations
• 9
Screws UNC 8-32 x 0.75
3/4"
Pipe
Note
: Screws required for electrical junction boxes are not supplied with the package.
These screws are readily available at local electrical supply stores.
Either flush mount or surface mount application, pre-drilled mounting holes on EasyView
Domes accommodate various electrical junction boxes, making installation easy and less
time consuming.
1.
Remove dome cover by loosening 3 screws. For indoor domes, use standard Philips
screw driver. For vandalproof domes, use Torx wrench provided with the package.
2. Surface Mount:
Using four ST4x30 screws, mount surface plate to a sturdy surface. Using three
ST4x12(Indoor) screws or M4x10(Vandalproof) screws, affix flush mount base to
surface plate.(For flush mount application, disregard this section)
3. Flush Mount:
Using four ST4x30 screws, affix flush mount base to a sturdy surface.
