N
T
W
Adjust Focus
Adjust Angle for Field of View
Remove the Gimbal cover from the Gimbal base.
1
Loosen Zoom & Focus screws and make necessary adjustments as shown.
Field of View:
Telephoto( T ) to Wide( W )
Focus:
Near( N ) to Infinity(
∞
)
2
If the picture is too bright or too dark, adjust the DC Level by turning left or right.
On WD Series, use the OSD Menu using the mini joystick board.
3
Please refer to Page 12 of this manual for further instructions.
5
Replace the Gimbal cover back to the Gimbal base.
4
12VDC/24VAC
CCTV Monitor
Service Monitor
• Power connection - Requires 12VDC or 24VAC input depending on camera model.
• All camera model are supplied with second video output on the camera module. To use
this feature along with a service monitor, second monitor cable/connector
(
Part# CA-SMC30
) is required. Contact your distributor or NUVICO Sales Department
for further information.
Focus
Zoom
Gimbal Cover
1
2
2
Open
Close
DC Level Button
3
1
2
3
4
CA-SMC30
20cm
5
Vari-focal, DC Auto Iris Lens Adjustments
10 •
Connections
• 11
Down
Up
Left
R
Right
Right
H Series / SD Series
WD Series
1
2
3
4
Down
Up
Left
R
Right
Right
H Series / SD Series
WD Series
Service Monitor Output
