Assembly & Mounting Accessories
4 •
How to Open the Gimbal Cover
• 5
Step-1
As shown below, hold the Gimbal base firmly in place with one hand.
Step-2
Gently press Points A & B with other hand and pull the Gimbal cover off.
Step-3
Make necessary lens adjustments. Refer to page-10.
Step-4
Replace the Gimbal cover by gently pressing back onto the Gimbal base.
Gimbal Base
Point-A
Point-B
Gimbal Cover
EasyView Dome Cameras have vari-focal lens integrated inside the Gimbal.
If you
require to make focal/focus adjustments, the Gimbal cover needs to be removed
temporarily. If lens adjustments are not necessary, skip to page-11.
• Torx Wrench - For Vandalproof Domes
Model #: T20
Length: 2
1/2"
Thickness:
1/8
"
• Assembly Screws - For Vandalproof Domes
These screws are used to affix dome cover to flush housing.
Model #: Philips M4x10
Qty: 3
Length: 10mm
Thickness: 4mm
• Assembly Screws - For Indoor Domes
These screws are used to affix dome cover to flush housing.
Model #: Philips ST4x12
Qty: 3
Length: 12mm
Thickness: 4mm
• Mounting Screws - For Vandalproof & Indoor Domes
These Screws are used to mount both surface mount plate or flush housing
to a sturdy surface. If necessary, use the anchors included in the package.
Model #: Philips ST4x30
Qty: 4
Length: 30mm
Thickness: 4mm
• Anchors - For Vandalproof & Indoor Domes
Qty: 4
Length: 30mm
Thickness: 6mm
