Nuvap N2Health Manual
Ver 1.7
9
12.
Warnings
Read this safety information carefully before using the device.
Nuvap N2Health is a versatile solution for a representative monitoring of air quality and therefore should not be
understood as a safety / alarm or scientific measurement tool:
-
It is not a measuring instrument and therefore cannot be used to establish compliance with legal
parameters regarding the presence of environmental pollutants. It is not a substitute for professional
measurements and technical expertise.
-
It is not able to monitor the air quality in environments that host a large number of people.
-
It cannot function properly if it is not installed outside the packaging.
-
It may not detect the presence of dangerous gases if the device is not close in the detection range
(maximum range of 80 m2 in open space).
-
It is not able to act in any way on the possible presence of pollutants in the monitored environment.
After an alarm always check for the existence of potential hazards in the installation environment.
Otherwise it can lead to occupants' health risks.
-
A professional installer is not required to install Nuvap N2Health.
-
Must be connected to the grid network via the supplied AC/DC power supply.
-
It must be used in environments with temperatures between -5 ° C (25 ° f) and 40 ° c (105 ° f).
-
It has been designed to be used indoors, at work or in residential areas; it is not suitable for
monitoring open spaces.
-
Do not expose the device to direct sunlight, heat, flames or water. The lack of this precaution could
result in malfunction or fire.
-
Do not place on uneven or unstable work surfaces.
-
Do not hold on the lap or any other part of the body.
-
Do not allow the device to come into contact with objects that could scratch or damage it.
-
Do not touch the device, power supply or cable with wet hands and do not disconnect the battery
charger by pulling the cable.
-
Do not use damaged cables, plugs, or loose sockets, and do not bend or damage the power cord.
-
Do not expose the device to strong external pressure, which could cause an internal short circuit and
overheating.
-
Never place the device near or inside heating systems, such as stoves, heaters, ovens, etc ...
-
Do not break or drill the device, do not disassemble and do drill the internal battery.
-
Do not put the device or the supplied accessories in your eyes, ears or mouth and always supervise
children if they come into contact with the device.
-
Do not use the device at service stations or close to other potentially explosive environments.
-
Do not bend or deform the device.
-
Do not immerse the device in water.
