background image

Pro N

2

 Alarm nitrogen Analyzer 

 

Nuvair 

Page 5 

www.nuvair.com 

2.0 System Description 

 
The Pro N

Alarm  nitrogen  analyzer  measures  nitrogen  (N

2

) levels in gases in the range of 

0.0  to 100%. The Analyzer  is designed to verify N

2

  concentration in stored gas cylinders, 

enclosed spaces  and with compressors pumping nitrox.  When used in breathing gas 
applications, redundant Analyzers must be used for verification.  In diving, for example, one 
Analyzer must be used to monitor nitrogen  during breathing gas production and a second 
independent Analyzer must be used to verify the nitrogen content of the stored breathing gas 
prior to diver use. 

 

When using the Analyzer for diving applications with mixed gases other than air, you 
must first obtain proper instruction from a certified diving instructor with a nationally 
recognized training agency qualified in mixed gas diving. Improper use of this analyzer 
may result in incorrect gas analysis which can lead to serious personal injury or death. 

 
The  Analyzer  is battery powered  and includes an 
internally  mounted  Sensor with audible alarm.  The 
Water-Resistant Case includes a Digital Display and 
controls that are environmentally sealed 
 
The Analyzer uses a Flow Adapter Cap and Flexible 
tubing to deliver sample gas to the Sensor. 

 

Pressurized gases must be regulated to avoid 
damage to the analyzer.  Use of this Analyzer in a 
hyperbaric chamber will void the owner’s warranty. 
 
The Analyzer comes in a high impact storage case.  
It is ready for use after calibration with an 
appropriate certified calibration gas.  
 

 

This analyzer is designed for use at atmospheric pressures only. It is not designed for 
exposures in a hyperbaric chamber. Use of this analyzer in a hyperbaric chamber will 
result in incorrect readings and may damage the unit. 

 

Although the Analyzer is a rugged instrument, careless handling or abuse may result 
in damage to the Analyzer resulting in inaccurate gas analysis. Inaccurate gas analysis 
can lead to serious personal injury or death. 

 

 

Breathing gas must always be analyzed by two separate Analyzers, with one used for 
production and one used for analysis after production.  Never depend on a single 
Analyzer during both gas production and delivery.  If the Analyzer readings do not 
agree, both units must be recalibrated.  Inaccurate gas analysis can lead to serious 
personal injury or death. 

 

Flow 

Adapter Cap 
Over Sensor 

Face

 

Water-

Resistant 

Case

 

Содержание Pro N2 Alarm

























Отзывы: