Nuvair Pro N2 Alarm, Руководство пользователя

Страница: 16 / 24

Pro N
2
Alarm nitrogen Analyzer
Nuvair Page 16 www.nuvair.com
If after handling the Analyzer or Sensor, you find that your fingers or
other parts of your body feel “slippery” or the skin or eyes sting,
immediately flush affected area with clean, fresh water for at least 15
minutes. The stinging or slippery sensation is an indication of a leaking Sensor. The
Potassium Hydroxide chemical contained in the Sensor can cause severe injury or
death. Seek immediate medical attention if eye contact is made or skin stinging
persists.
8.4. Handling Sensors
Replacement Sensors are supplied in sealed bags. Normally Sensors do not present a health
hazard. Before opening the bag, check that the electrolyte has not leaked. However, if
electrolyte leakage has occurred, do not open bag. Dispose of Sensor properly or return for
replacement. If electrolyte leakage occurs while the Sensor is in service, use rubber gloves
and chemical splash goggles for handling. Rinse contaminated surfaces thoroughly with
water.
Electrolyte First Aid Procedures
•
Ingestion - Drink a large volume of fresh water. Do not induce vomiting. Get immediate
medical attention.
•
Eye Contact - Flush eyes with clean, fresh water for at least 15 minutes and get
medical help immediately.
•
Skin Contact - Flush the affected area with clean, fresh water for at least 15 minutes
and removed contaminated clothing. If stinging persists get medical attention.
Do not try to disassemble the sensor. Sealed unit contains caustic liquid
(KOH) which may cause severe burns to skin and eyes. In case of contact,
flush 15 minutes with water. For contact to eyes also get medical
attention. Do not wet in any case. If not properly cured the eyes may have permanent
damages.